Why Get Your Car Key Programmed?
Many people require their keys programmed for their cars. You may have to reprogram your remote when you have children who frequently press the button or if you've lost the keys.
Some dealerships and auto locksmiths have special equipment for this. They can also copy your existing key if it's possible.
Transponder Keys
Transponder keys are also referred to as electronic car keys, chip keys, or smart key. Transponder keys have an embedded microchip that can store and send information, which helps to protect your vehicle from being stolen. The microchip sends out a unique identification code each when the key is turned in the ignition. When the ID code matches in the computer of your vehicle the immobilizer is removed and your engine will start to run.
This is a better security measure than a non-transponder keys, which do have a chip, and is not compatible with the anti-theft system of the majority of modern automobiles. Transponder chips have been implemented to help reduce thefts from cars. They have proven to be hugely successful.
When the key is inserted into the ignition, a small antenna called an inductive coil that is located on the car key's transponder will power up. The transponder then sends out an radio frequency signal that contains an unique "password". This is transmitted to the anti-theft system of your vehicle. If the password is correct, the vehicle will disable its immobilizer and allow you to start the engine.
If the password is wrong the immobilizer stays in effect and the engine won't start. This is a great method to deter thieves from taking your car because even the case that a duplicate key could be created, the thief won't have the code to trick your vehicle into starting.
Transponder keys cannot be used with mechanical keys. These kinds of keys for cars work by physically moving the lock mechanisms on doors or the cylinder of ignition for example, like GM's VATS (Vehicle Anti-Theft System) system that requires the proper amount of resistance to turn the cylinder.
This traditional non-transponder key can still be duplicated at an locksmith. However, the thief will need to manually move locks in order to start the car, and will require a transponder programing tool to do so. This is among the main reasons why it is recommended to call a professional car locksmith like Pop-A-Lock whenever you need a new transponder key cut or a car key that has been programmed.
Electronic Key Fobs
A key fob emits a signal that activates your car's locking system, allowing you to unlock the door and enter your vehicle. Depending on reprogram car key of the model, you can also control your trunk and alarm. The microchip inside the fob sends out codes that are then interpreted by the receiver. The code corresponds to a specific frequency and if the receiver detects that frequency, it sends a command for your lock to start working.
If you are using a fob for commercial purposes, it can be integrated with a security system already in place. This will provide additional levels of protection. Fobs are able to be immediately blocked if they're lost or stolen, which is an added security feature in a workplace where a key might drop off on a desk or be picked up by unauthorised individuals. Fobs can also be copied to create unauthorized copies that contain your security codes. This leaves your car vulnerable to intrusion by anyone else.
Fobs are extremely convenient and can be used to open your doors without the need of the traditional key. It isn't difficult for a common person to program a fob, even when it requires some knowledge of technology. Fobs are usually programmed using the aid of a specific software tool or following instructions in the user manual of the vehicle.
The process of reprogramming the key fob is similar across most models, and you will often find more detailed information regarding your specific model in the owner's manual or on the manufacturer's site. It is important to remember that these steps might not be applicable to all models. If you have any issues, consult your dealer or call an expert locksmith.
Start by getting into your driver's seat and holding the key fob you wish to reprogram in your hands. Make sure that your door is shut and there are no other keys in the ignition. Press and hold the lock button on your fob until you hear a chime, or the sound of the locks turning to indicate that you've entered the program mode. Repeat these steps if needed to program other fobs.
Enhanced Security
Transponder keys offer an additional layer of security not always found in traditional key fobs. Transponder keys are less likely to be stolen by thieves because the chip can only match the code to the immobilizer inside your vehicle. If it does not, the vehicle will not start and it will be more difficult to steal.
Modern transponder keys do not contain a chip inside the lock, but instead inside a separate part of the key. When you insert your key into the ignition the radio signal will be transmitted to the transponder. If the code is correct it will match the immobilizer of your vehicle and the car can be started. Modern keys must be programmed correctly to work.
Although it is possible to modify car keys yourself, this process is dangerous and should only be done by professionals. Untrained individuals often find that their key does not perform as expected or damages the immobilizer in the car when they attempt this. A reputable car dealer or locksmith has experience in these situations and be able to assist you in the most efficient manner.
Furthermore, the efficiency of the most advanced anti-theft systems depends on the proper programming of your key. This means you'll need to change your keys as soon as they are lost or stolen so that they won't be able to gain access to your vehicle.
The benefits of personalized key programming for car owners in Philadelphia are increased convenience and peace-of-mind. If you're looking to take advantage of the extra security that this technology provides contact Nonstop Locksmith 24/7 today and see how they can help safeguard your vehicle from theft and unauthorized use. Contact them today to find out more about programming your car keys.
Getting Started
Car key programming, as the name suggests is the process of synchronizing the authorized car keys with the vehicle. When the key is inserted it transmits an electronic serial number to the car's onboard computer system which then allows the car to be unlocked. car key programming is a good way to prevent auto theft, as if a car key isn't programmed correctly, it won't allow the vehicle start.
There are several alternatives to get your car keys programmed, such as visiting your local dealership or your vehicle manufacturer. However they are usually expensive and require a considerable amount of time. You can also choose to hire an auto locksmith professional. They will have all the tools and experience needed to program any car key, regardless of whether it's a new smart key or an older remote key. They are able to work quickly, which is crucial in a time of need.
Some people may choose to try and modify their car keys however this isn't an ideal option. It's difficult to know which of the many methods that are available will actually work, and it's easy to make mistakes that can damage the car's computer system. Additionally that many of the tools used in programming cars are extremely sophisticated and expensive, making them difficult to use for a typical person.
Another thing to take into consideration is that, depending on the vehicle, it's often not possible to reprogram a stolen or lost key. The original key contains an electronic chip that is linked to specific information about the vehicle. Reprogramming a lost or stolen key will not change the information associated with it which means that the vehicle won't recognize it as authorised.
If you're looking to purchase an automobile You should think about getting the transponder key programmed as early as you can. This will make your new car as secure as it can be and is a lot cheaper than replacing a lost key.